IIt is lining paints of the cubic pattern-making paint system that is composed of primer, patterning paints, and acryl coating. It can make clear and voluminous particle patterns, and it can make big and small prominence and depression. It is cubic pattern-making paints for the interior.

1. Completely remove any laitance, dust, oil, and other pollutants on the surface.
2. Repair the cracks and the damaged parts on the background, using Baro Putty, to make the surface smooth.
3. In order to strengthen the adhesiveness, apply Baro Primer on the whole, using a roller or a spray.
4. In the case of doing the repair work on the existing coated surface, check the suitability with the old coating first.
5. It cant show its normal properties when it is rainy, humid (over 80%), or cold (less than 10°C) so Don’t do the coating work.
(Cracks, poor adherence, or color difference can happen.)
6. Coat after confirming that the primer is completely dry.
7. Do the test coating to adjust the size of a pattern.
The quantity of the paints actually used can be different according to the status of the material, the coating method, and the coating conditions.
8. Use a spray gun for coating. You can adjust the size of a pattern by adjusting the size of the nozzle of the spray gun and the spraying pressure.
9. Start the coating work after confirming that lining is completely dry. (20°C, Over 48 hours)
10. In case the coating work is done under the circumstance that lining is not completely dry, a defect can be made on the coating due to evaporation of moisture.
11. In order to be fully absorbed into the lining at a time, the coating material should be diluted watery first, and for the second coating, its viscosity should be increased.

1. In case the surface treatment is not sufficient, it can cause defective adherence and peel-off so make it perfectly.
2. In the case of doing the repair work on the existing coated surface, check the suitability with the old coating first.
3. It cant show its normal properties when it is rainy, humid (over 80%), or cold (less than 10℃) so Don’t do the coating work.
(Cracks, poor adherence, or color difference can happen.)
4. In case the coating work is done under the circumstance that it is not completely dry, a defect can be made on the coating due to evaporation of moisture.
5. Do not dilute. Use the original paints. (Diluting is difficult to make thick patterns.)

- APT specialization- pilotis, stairs, inner wall of corridor, ceiling and others
- Commercial building- inner wall and ceiling of quality cafeteria, hotel, condominium and entertainment shops
- Arts facilities- inner wall and ceiling of premium exhibition hall, multipurpose hall, gallery and concert hall.